8
ZA-9120TU
Ordercode: D6153
Backside
Fig. 03
Cooling fan
Do not obstruct the air inlet.
IEC power connector 230V AC + fuse T5AL/250V
Connect the device to the appropriate power supply.
AC selector
Before connecting your ZA-9120TU to the mains, make sure that the AC selector is set to the proper
voltage which is used in your country. In case of doubt, consult a technician.
75Ω FM antenna connector
Connect your FM antenna to this connector.
Loop through RCA IN/OUT
Loop through input and output connections allow external sound processing equipment to be
connected between the preamplifier and the power amplifier stages.
Aux – RCA IN
Connect an auxiliary signal source. The
source selector (10)
must be set to
6
.
Video – RCA IN
Connect a video signal source. The
source selector (10)
must be set to
5
.
CD – RCA IN
Connect a video signal source. The
source selector (10)
must be set to
4
.
Mic 3 function
DIP switches
Moving the DIP
switches to ON/OFF allows you to set up combo input 3. The available options are:
Speech/Music
Phantom
Line/Mic
Speech/Music:
If set to ON, the device will cut off the lower frequencies of the input signal, which will
improve speech audibility. If set to OFF, the low frequencies will not be cut off.
Phantom power:
If set to ON, the device will provide power to condenser microphones.
Line/Mic:
If set to ON, the input sensitivity will be set for line inputs. If set to OFF, the input sensitivity will
be set for microphone level.
Summary of Contents for D6153
Page 22: ...21 ZA 9120TU Ordercode D6153 Dimensions...
Page 23: ...22 ZA 9120TU Ordercode D6153 Notes...
Page 24: ...2016 DAP Audio...
