3
Xi-5/6/8/10 MKII
Safety Instructions
Every person involved with the installation, operation and maintenance of this system has to:
●
be qualified
●
follow the instructions of this manual
Before you initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the system.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the system are not subject to
warranty.
This system contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the system.
●
Never remove warning or informative labels from the unit.
●
Never leave any cables lying around.
●
Do not open the device and do not modify the device.
●
Do not set the input signal level higher than required to drive the equipment to full output.
●
Only use system indoors, avoid contact with water or other liquids.
●
Avoid flames and do not put close to flammable liquids or gases.
●
Make sure you do not use the wrong kind of cables or defective cables.
●
Extreme frequency boosts in connection with a high input signal level may lead to overdriving your
equipment. Should this occur, it is necessary to reduce the input signal level.
●
If system is dropped or struck, disconnect the power supply immediately. Have a qualified engineer
inspect for safety before operating.
●
If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your system. Leave the
system switched off until it has reached room temperature.
●
If your Dap Audio device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Dap Audio dealer for service.
●
Repairs, servicing and electric connection must be carried out by a qualified technician.
●
Keep this manual for future reference.
●
Clean only with dry cloth.
●
No main power shall be connected to the loudspeakers; doing so will damage the speaker.
●
Take care of your speaker wires, they should be free of damage. Damaged speaker wires might
result in poor sound quality and can damage amplifiers.
●
This device should only be serviced by qualified personnel. If not warranty might be void.
●
Use cable of the right gauge, certainly for long runs.
●
Use cables with clear color indication and maintain polarity throughout the whole system.
●
Avoid loud feedback from microphones, this can damage your speaker.
●
Please check the unit’s condition after unpacking. If the outside of the carton box has been
damaged, inform your shipper immediately.