DAPAudio D2680, Product Manual

Page: 13 / 16

11
38. Video Gain Control
Use to adjust the video output level of the keypad. Range 0 - +6dB.
Keypad Installation
Fig. 8
Remote Control
39. Mute Button
Press to mute all zones.
40. /-
Use these buttons to select the input source C1-C6.
41. /-
Use these buttons to adjust the Treble level.
42. /-
Use these buttons to adjust the Volume level.
43. Balance L/R
Press to mute all zones.
44. Camera Scan
Press to scan the cameras connected to your controller’s
Camera source inputs (15) in sequence and display them on the
monitor connected to your keypad’s Video Out connector (37) .
Make sure, the Camera scan jumper (35) is in place.
45. Power Button
Press to turn on the keypad and activate the corresponding
zone. Press again to turn the keypad off.
46. Call Button
Press to turn on the Call function. Press again to turn the Call
Fig. 9
function off.
47. Bass +/-
Use these buttons to adjust the Bass level.