DAPAudio D2288, Manual

Page: 14 / 24

13
GIG-244CFX
Order code: D2288
50. CHANNEL FADER GROUP 3-4
Use this fader to control the output level of the subgroup mix.
51. MAIN GR 1-2
Pressing this button, the total signal from group 1-2 will send to the MAIN MIX bus.
52. MAIN GR 3-4
Pressing this button, the total signal from group 3-4 will send to the MAIN MIX bus.
53. PFL OVERALL
This LED will light up when a PFL button is pressed.
54. SWITCH MAIN/GROUP
If you press the MAIN MIX/GROUP button, the signal from GR1-2 or GR3-4 will be routed into the CONTROL
ROOM output. Press the button again, the signal from MAIN MIX will be routed into the CONTROL ROOM
output.
55. SWITCH GR 1-2 /GR 3-4
If you press the GR 1-2/GR 3-4 button, the signal from GR 3-4 will be routed into the CONTROL ROOM
output. Press the button again, the signal from GR 1-2 will be routed into the CONTROL ROOM output.
56. PHONES
With the PHONES control you can adjust the volume level of all signals routed to the headphones.
Depending on the type of headphones connected to the phones jack, the MAIN MIX is capable of
producing very high output levels via the PHONES output. Therefore, make sure to turn the control all the
way down (minimum setting) before connecting the headphones.
Warning: Listening to loud sound pressure levels over a longer period of time leads to hearing damage!
57. CONTROL ROOM
With the CONTROL ROOM knob you adjust the volume level of the CONTROL ROOM OUTPUTS (69).
58. MUTE MAIN MIX
The mute switch mutes the MAIN MIX output.
59. MAIN MIX LEVEL
Use this fader to control the output level of the MAIN MIX.