DAPAudio D1486, User Manual

Page: 12 / 16

11
EDGE EUA-1
Product code: D1486
6. Troubleshooting
This troubleshooting guide contains solutions to problems which can be carried out by an ordinary
person. The device does not contain user-serviceable parts.
Unauthorized modifications to the device will render the warranty void. Such modifications may result in
injuries and material damage.
Refer servicing to instructed or skilled persons. Contact your Highlite International dealer in case the
solution is not described in the table.
Problem Probable cause(s) Solution
The device does not
function at all
No power to the device
● Make sure that the device is
connected to the antenna distributor
or to the receiver
Bursts of noise or other
audible signals
present
Sources of interference are present
● Identify potential sources of
interference (other RF-sources) and turn
them off
● Set the gain boost switch (03) to 0 dB
● Move the device to another place until
the sound quality is good
7. Maintenance
Preventive Maintenance
Attention
Before use, examine the device visually for any defects.
Basic Cleaning Instructions
To clean the device, follow the steps below:
Disconnect the device from the antenna distributor/ receiver.
Clean the device with a soft, lint-free cloth.
Attention
● Do not immerse the device in liquid.
● Do not use alcohol or solvents.
Corrective Maintenance
The device does not contain user-serviceable parts. Do not open the device and do not modify the
device.
Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for
more information.