10
Maintenance
The
DAP Audio EM-193
requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections
with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying
electric power.
Troubleshooting
DAP Audio EM-193
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1.
If the device does not operate properly, set the switch on the EM-193 in OFF position.
2.
Check the batteries, etc.
3.
If all of the above appears to be O.K., Set the switch in ON position.
4.
If you are unable to determine the cause of the problem, do not open the EM-193, as this may
damage the unit and the warranty will become void.
5.
Return the EM-193 to your DAP Audio dealer.
Product Specification
Type: Dynamic, moving coil.
Polar pattern: Cardioid
Frequency Response: 50-16.000 Hz
Max. SPL: 138 dB (1% THD)
Power supply: 2x Battery UM3, AA1.5V (not included)
Carrier Frequency Range: 740-846 MHz
RF Output: 10 mW
Stability: ±0.005%
Frequency Deviation: ±48 kHz
LCD Display: Frequency, battery fuel gauge
Controls: Power On/Off, mode setting, AF Level Control,
Frequency Up/Down, Lock-on mode
Spurious Rejection: <-60 dBC
Dimensions: mic: Ø 50 mm x L 260 mm
Net. Weight: 0,262 kg
Design and product specifications are subject to change without prior notice.
Summary of Contents for D145179
Page 1: ...EM 193 ORDERCODE D145179 ORDERCODE D145182 ...
Page 13: ...2010 Dap Audio ...
