DAPAudio D1184, Product Manual

Page: 12 / 19

10
23. Time:
Press this button to switch the Time-Display between the elapsed time and remaining time. The
selected mode is indicated by the ELAPSED, REMAIN and TOTAL REMAIN indicator on the LCD.
24. Single:
Press this button to switch between the SINGLE and CONTINUOUS play mode. The selected mode is
indicated on the LCD. In SINGLE mode, the unit stops playing after each track. In CONTINUOUS mode,
the unit plays all tracks and then stops.
25. Pgm (Program):
Press the Pgm Button, the player will enter the program mode and stop the CD playback.
26. Repeat:
Use this button to repeat one track or all tracks of the CD.
27. SD Card-slot
Slot for inserting SD/MMC card. The contacts of the card must point downwards. The unit cannot read
cards with a capacity of more than 4GB. The unit is not compatible to SDHC cards and only supports
the MP3 format.
28. Disc Slot
Place the disc gently in the slot. The disk will load automatically. Stop playback and pres the Eject
button to eject the disk.
29. Power ON/OFF
This is the main Power switch. Press to turn the device on.
30) Controller- Main Unit Connector
Use the supplied control cables only. Using other cables will result in damage.
31) Main Unit- Controller Connector
Use the supplied control cables only. Using other cables will result in damage.
32) RCA Line Out
Use these outputs to connect a mixer with unbalanced RCA inputs.
33) Mains 230/240Vac 50/60Hz inlet
Use the supplied power cable to connect the device to the mains.