9
Cable Tester Pro
Ordercode: D1909
Maintenance
The DAP Audio Cable Tester Pro requires almost no maintenance.
However, you should keep the unit clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Replacing the Fuse
Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the
fuse burns out, the product will not function whatsoever. If this happens, follow the directions below.
01)
If the device does not work properly, turn the device off.
02)
Check the battery.
03)
If all of the above appears to be O.K., switch the unit on again.
04)
If nothing happens after 30 seconds, switch the device off.
05)
Return the device to your DAP Audio dealer.
