DAPAudio 800-D MKII, Product Manual

Page: 8 / 19

6
Installation
800-D MKII Installation
Remove all packing materials from the CD Player. Check that all foam and plastic padding is removed.
Screw the CD player in a 19“ Rack. Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. The power supply is printed on the back of the device.
Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Fig. 1 Fig. 2
CAUTION: The player will work normally when the unit is mounted with the front panel at 15 degrees of the
vertical plane. If the unit is tilted excessively, discs may not be loaded or unloaded properly. (Fig. 1)
The control panel’s LCD’s are designed to be clearly visible within the angles (Fig. 2). Mount the control unit
so that the visual angle is within the range.
Connections
1. Turn off the POWER switch.
2. Connect the RCA cable to the input of your mixer.
3. Connect the control cords to the REMOTE connector on the Main Unit.
CAUTION:
Be sure to use the supplied control cords. Using another type of cable may result in damage.
Be sure that the power is off, when connecting the cables.