DanVex DEH-290h, Operation Manual

Page: 12 / 16

R
www.danvex.fi
Start up and operation
1) Use ON/OFF button to switch the unit on/off.
2) Select the desired dehumidification mode using the MODE CHOOSE button. The
modes shifting sequence is as follows: Dehumidification - Clothes drying.
3) In the " Dehumidification " mode set the required humidity in the room using UP/DOWN
buttons. It is possible to set the humidity within the range from 30% to 90%.
4) Use the FAN SPEED CHOOSE button to regulate the fan speed (low or high speed).
5) In the
" Clothes drying " mode humidity and fan speed parameters are not set.
6) Use the TIMER SETTING button to set the switching off timer (the unit switch off time
can be set from 30 minutes to 12 hours).
Service and Maintenance
Long-life and trouble-free performance is based upon regular maintenance and watch
service.
Nevertheless, complete equipment inspection should be carried out annually, it is also
required to perform complete cleaning of the equipment after any long idle periods. Frequent
maintenance is not required since all moving parts of the equipment are provided with
permanent lubrication. The cooling system is of a closed and low-maintenance type. The
cooling system maintenance should be performed by an authorized service center only.
Please, make sure the power plug is disconnected from the mains socket prior
to any maintenance jobs!
◊ Do not allow dust or other matters to build up on the machine.
◊ It is allowed to clean the unit with dry or slightly wet clothes.
It is forbidden to clean the unit using a direct water jet.
◊ Do not use any abrasive detergents or solvent-containing cleansers; use proper cleansers
and detergents only even if the unit is heavily polluted.
◊ It is required to check the air filter condition regularly.
Clean and replace it as appropriate.
Only authorized personnel is permitted to perform works on cooling and
electrical system.
11