R
www.danvex.fi
15
Startup and operation
Mode selection (1)
To set the necessary mode press the “MODE” button
Auto > Dehumidification > Ventilation > Heating
Attention:
- Heating mode is available only at the models
equipped with the heating element.
Air flow selection (2)
Press the “FAN” button to set the air flow.
Each pressing changes the fan speed.
Auto > Low > Moderate > High
Attention:
- In “Auto FAN” mode the dehumidifier selects the
optimum speed depending on the room temperature.
- In “Dehumidification” mode the fan speed button
is not active.
Temperature setting (3)
Press Up or Down buttons to select the necessar
temperature from + 16C to 31C.
Dehumidifier startup (4)
Press “ON/OF” button and the panel will send the
set information. The dehumidifier will start working
after two audio signals.
Attention:
- In case of the repeated startup you can skip the
steps 1 – 3 if the fan and temperature parameters
are not to be changed.
- In case of the repeated switching on the
compressor will start not earlier than in 3 minutes
after the humidifier switching off.
Summary of Contents for DEH-1700P
Page 1: ...D EH 1700P Air dehumidifiers Operation manual...
Page 2: ...R www danvex fi 1...
Page 19: ...R www danvex fi 18 Wiring diagram...
Page 23: ......