Drawer
Drawer pull
STEP 3)
Optional Drawer
•
Follow this step only if you have the optional add-on drawer.
Items needed: Drawer and 4-#10 screws (L).
•
Attach the drawer pull to the front of the drawer with the screws
provided with the drawer pull.
•
Remove the Front skirt.
•
Place the drawer with the open side down on the Top (A) with the
drawer front at the opening left from the removed front skirt.
(Fig. 5)
•
Align the four mounting holes and use 4 #10 screws (L) to fasten
the drawer to the Top (A). (Fig 6)
A
L
STEP 4)
Attaching Legs
•
Items needed: 4 – Legs (E) and 8 – Small nuts and screws (J).
•
Place one leg at a corner formed by two skirts from the outside, setting the leg on the
bottom of the Top (A). The caster end of the leg should be the end that is up.
(Fig. 7)
•
Use a straight head screwdriver to fasten 2 - Small screws and nuts (J). Place the
screw head on the outside of the leg, and the nuts on the inside of the skirt.
•
Repeat for all legs. (Fig. 9)
Fig-7
Fig-9
Fig-8
E
L
Fig-5
Fig-6
