background image

2

•  Check the parts list to make sure all parts are included and in good condition.
•  Read and follow each step carefully.  It is very important that each step of instruction is performed in the correct order. 
•  To clean the product, use a general purpose cleaner and a soft cloth.

Stainless Steel Cleaning

The following are some important tips on cleaning your stainless steel:

•  There are a number of reliable stainless steel cleaners on the market
•  Use only alkaline, alkaline-chlorinated or non-chloride cleaners
•  Avoid hydrochloric acid (muriatic acid) on your stainless steel
•  Always use a non-abrasive cleaning tool such as a soft cloth or plastic scouring pad
•  Avoid steel pads, wire brushes and scrapers
•  Always clean in the direction of the polishing marks by locating the lines or grain and scrub in a motion parallel to them
•  If you do end up using a chlorinated cleaner, be sure to rinse thoroughly and dry it, immediately
•  Air dry your equipment

WARRANTY

Danver warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect.  This warranty covers five years from 

date of original purchase.  This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included.

This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in 

any way.  Liability for consequential damages is excluded to the extent exclusion is permitted by law.  This warranty gives you specific legal rights.  Additional 

warranty rights may be provided by law in some areas.

To obtain warranty services, purchaser must present original bill of sale.  Components repaired or replaced are warranted though the remainder of the original 

warranty period only.  The defective components will be repaired or replaced without charge, subject to the terms and conditions described above.

IMPORTANT:  READ FIRST

Summary of Contents for FS18B









Reviews: