If the tracker is mounted within the saddle tube, you can use an exis8ng hole,
or drill a new one for the antenna-‐cord. D5mm. drill is recommended.
Note:
Be aware of the placement of the hole, the antenna-‐cord must not be
clamped, stretched or cut by e.g. the seatpost.
1
A: Subscribe at:
www.dantracker.com
and register your tracker.
B: Firmly aEach the antenna to the tracker-‐cord.
C: Shake the tracker for 5-‐10 seconds, hold the
antenna and tracker together in one hand.
B
C
Safety Guard GPS (EA) Moun6ng manual BIKE
C: When the tracker is registeret as ac8vated, you
will receive an E-‐mail. You are now ready to
mount the tracker to your bike.
A
D
The tracker kan be mounted in several different places on the bike. Safety
Guard GPS tracker is designed to be mounted in the saddle tube, but can be
placed anywhere you find adequate. The tracker will func8on either way it is
turning, the placement of the antenna states how the tracker is mounted.
3
This Moun8ng manual illustrates how you can mount your Safety
Guard GPS with external antenna to your
BIKE
.
We recommend the moun8ng is done at a professional bike repair shop.
The following procedure is recommended:
1.
Look through, read and understand the manual before star8ng.
2.
Consider how and where you plan to mount the tracker and the antenna.
3.
Make sure the considered placement is possible before star8ng.
4.
You are now ready to follow the procedures listed below.
PLEASE NOTE:
Safety Guard GPS tracker with external antenna is typically
recommended for use on devices where the tracker is hidden within metal or carbon fiber.
Version 1.01
2
