34
3.4 How to install the MTS4 into the outdoor enclosure
Introduction
This section will guide you through the installation of the MTS4 into the outdoor enclo-
sure.
The outdoor enclosure is specially designed for installing the Motorola MTS4 base sta-
tion. No redesign of the MTS is needed, but a few precautions need to be taken in order
to ensure optimum performance of the outdoor temperature regulation and to ensure
normal operation.
Necessary tools
The following tools are needed for the installation:
10 and 13 mm wrench
Torx T30 screwdriver
Adjustable pliers
Procedure
Follow these steps to install the MTS4 into the outdoor enclosure:
Step
Action
1
Unpack the MTS4 and remove the door
(The door should not be used, when the
base station is fitted in an outdoor enclo-
sure)
2
Remove the lifting eyes completely and
spare two screws for later use
3
Remove the levelling feet from the base
station completely (the levelling feet
should not be used, when the base sta-
tion is fitted in an outdoor enclosure)
Continued overleaf
