Dantherm Combo Cooling 10000/1000, Quick Setup Manual

Page: 2 / 28

2
This installation manual and the product use various displays and labels to ensure safe use. Ig-
noring these displays and labels and incorrectly using the product could have results as classified
below. Please read the following warning symbol information before reading the rest of this sec-
tion, and be sure to strictly observe all instructions.
Not following these instructions could result in death or serious injury
Not following these instructions could result in injury or property da-
mage.
The symbol means something that should NOT be done
Project safety is your responsibility!
Follow the instructions in this manual regarding the installation method and installation orienta-
tion. Not following these instructions could result in injury, death, or damage to equipment.
All work should be performed by qualified personal using safe work practices.
All proper personal protective equipment should be used. PPE required for this installation inclu-
des but is not limited to:
•
Safety glasses
•
Hard hat
•
Safety shoes
•
Hearing protection
•
Cut resistant gloves
•
Face shield
•
Proper work attire (long sleeve shirt and long pants)
Please strictly observe the following: Special Skill is required to install the Dantherm Combo
Cooling units. Non-qualified personnel should not attempt any of the actions shown in this instal -
lation guide. Dantherm shall not be responsible for improper installation or any accidents, dama-
ge, or injury resulting from improper installation.
Warning
Caution
Warning
Caution
Warnings