Dantherm CDT 90 MKII, Service Manual

Page: 4 / 248

2
Setup and user guide
Product and function descriptions
Introduction This section provides a product description of the CDT 90 MKII, plus a description of its
functionality.
How it works Air flow through the dehumidifier:
How the air changes as it passes
through the dehumidifier:
The fan draws humid air through a fil-
ter inside the dehumidifier.

The air is cooled, causing the moisture
content to condense into drops of wa-
ter, which are passed through the
drain hose to a drain.

The air is reheated using heat from the
dehumidifier's operation (temperature
increase of approx. +5
°C).
As the air is repeatedly circulated through the dehumidifier, its moisture content is re-
peatedly reduced, resulting in
rapid, gentle drying. The dehumidifier can run constantly,
or be controlled by a built-in hygrostat.
Illustration Illustration of dehumidifier:
Rear view Front view
Drain Condensation is collected in the integrated drip tray, and then passed via the ½" hose
connector provided to a drain.
The hose connector should be fitted immediately after unpacking.
Continued on next page
Handle
Air intake with PPI filter be-
hind grille
Air exhaust
Control panel
Type plate behind cover
Wheel
Power cord
Data socket
remote monitoring
Drain
www.dantherm-ltd.ru • info@dantherm-ltd.ru • +7 (495) 545-48-79
Москва. Каширский проезд д. 19 стр. 2