4
Overview
This is the service manual for the Dantherm product AD 200 / 300.
Please see the table of content on page 3 for further information about the sections.
This instruction manual addresses all technicians who install and maintain the AD 200 / 300 as
well as all end users. These persons must have read and understood the instruction manual.
The physical and psychological preconditions for proper and safety-conscious handling of the
devices must always be guaranteed.
Using a device outside the specified conditions and contrary to its designated use will lead to
the forfeiture of all warranty claims.
Dantherm reserves the right to make changes and improvements to the product and the
service manual at any time without prior notice or obligation.
Copying of this service manual, or part of it, is forbidden without prior written permission
from Dantherm.
In this instruction manual you will find notes preceding the operating steps described to
warn you of possible hazards.
Type and source of hazard
This symbol in connection with the word “Danger” warns of a high risk of severe injury or
acute danger to life.
• Measures to avert danger or immediate measures if the risk occurs are described in this
way
Type and source of hazard
This symbol in connection with the word “Warning” warns of a risk involving severe injury.
• Measures to avert danger or immediate measures if the risk occurs are described in this
way
Type and source of hazard
This symbol in connection with the word “Caution” warns of a risk of minor or moderate injury
and material damage.
• Measures to avert danger or immediate measures if the risk occurs are described in this
way
In connection with this symbol you will find further tips and information concerning the use
of the device.
Introduction
Target group
Warranty claims
Reservation
Copyright
Conventions
Warning
Caution
DANGER
Warning
Caution
WARNING
Warning
Caution
CAUTION
!
TIP
