Dante DNA3000-04 Installation And Operation Manual Download Page 30

Page: 30 / 139

3333

HDD Installation

For the first time install, please be aware that whether the HDDs have been installed.

Strongly recommended to use the HDDs which we suggest you to use (high speed HDD that above 7200

rounds), we do not suggest you to use PC specified HDD.

3.1

1U Series

Series

Series (NOT AVAILABLE)

(NOT AVAILABLE)

Pleas follow the steps listed below to install the HDD.

①

Remove screws on the

②

Fix the four screws on the

③

Place the HDD in accordance

rear panel and the side panel. HDD (rotate three rounds) to the four holes.

④

Turn the device upside down

⑤

Fix the HDD on the bottom panel.

⑥

Insert the HDD wire and power

and then insert the screws to cable

the bayonet and fix them

⑦

Uncover the box cover.

⑧

Fix the screws on the rear & side panel.

Summary of Contents for DNA3000-04












































































































































Search results

Summary of Contents for DNA3000-04

Reviews:

Brands by name

Popular brands

Dante DNA3000-04, Installation And Operation Manual

Search results

Summary of Contents for DNA3000-04

Reviews:

Brands by name

Popular brands