2. INSTALLATION
AUTO IRIS LENS
1. Remove the protective cap from the camera's lens mount.
2. Carefully align the CS/C lens into the camera lens mount and turn clockwise
slowly until it firmly attached.
3. Insert the cable Plug into the lens terminal socket located behind of the camera body.
4. For IRIS connector details see the following table.
IRIS JACK
DC LENS
1
DRIVE +
2
DRIVE -
3
DAMP +
4
DAMP -
MANUAL IRIS LENS
1. Remove the protective cap from the camera's lens mount.
2. Carefully align the CS/C lens into the camera lens mount and turn clockwise
slowly until it is firmly attached.
POWER SUPPLY
1. Before turning on the power to the camera, ensure that the lens is fitted with
the camera to avoid damage to the exposed CCD chipset.
2. Connect camera to 12VDC power supply.
CONNECTION
1. Connect the video outputs of the camera to the video inputs of a monitor or DVR.
2. Connect power supply to the power input on the camera then turn on the power.
3. Adjust the lens and camera's setting to get the best image.