24
DIS
: the DIS mode can compensate for vibration of the camera .
SPECIAL SETUP
USER PRESET
OFF
PRIVACY
OFF
OFF
Day/Night
AUTO
DIS
SYNC
INT
COMM Addition
IMAGE Addition
EXIT
COMM ADJ:
use this feature to select communication protocol.
Position the indicator over 'COMMUNICATON' using the UP or
DOWN button.
COMMUNICATION SETUP
CAM ID
1
DISP CAM ID
ON
BAUD RATE
2400
UART MODE
8-E-1
RET PKT
DISABLE
EXIT
Note:
This feature have digital zoom function, so maybe reduce
the horizontal resolution .
25
26
27
SYNC
FUNCTION
Power
CCD
OPTICS
DC12V 10%
DC12V/300mA (steady-state), 500mA( Max)
Input current
Power
Consumption
Size
Total pixels
Effective pixels
Input voltage
DC12V/4W (Normal), 6w(Max)
1/4 Inch, Color Super HAD CCD
795(H)*596 (V)
752(H)*582(V)
Optics
Min.focus distance
30X,f=3.3mm to
99mm (F1.6 to 3.2)
1000mm
D.ZOOM
10X
Angle field of view
H: 58 ( near focus) to 2.22 (far focus)
V: 44.8 ( near focus) to 1.68 (far focus)
scanning system
2:1 interlace
Internal
Horizontal: 15.625 KHz, Vertical :50.00 Hz
Camera id
255 ID selectable
Resolution
Color:540tvl. B/W: 570TVL
video output
CVBS:1.0Vp-p
S/N ratio
50dB (AGC off. Weight ON)
Mini.illumination
Color:0.7lux/f1.6 (50 ire)
B/W: 0.1Lux/F1.6 (50 IRE)
Sens-up:0.0005Lux/F1.6 (50 IRE)
Backlight
compensation
LOW/MIDDLE/HIGH /OFF selectable
Day/Night
Color/ b/w (icr type)
Gain control
LOW/MIDDLE/HIGH /OFF selectable
white balance
ATW/ auto white balance/Manual
Electronic
shutter speed
Auto/ Manual (x128-1/50s -1/12000 s)
X128
Sens-up
O.S.D
Built-in
Motion detection
ON/OFF (built-in alarm output signal)
Frequency
Sync
+
_
Model
Operating Your Camera
Operating Your Camera
Operating Your Camera
Operating Your Camera
Specifications
Specifications
Specifications
Specifications
PRIVACY: Mask privacy area using this feature. The mask area
expand/ contract upon the zoom position.
USER PRESET
PRIVACY
DAY/NIGHT
DIS
SYNC
COMM
SPECIAL SETUP
OFF
OFF
AUTO
OFF
INT
DAY/NIGHT:
select from COLOR. B/W or AUTO mode.
GROUP SEL :
Choose up to eight groups. Each group can consist
of four mask areas.
AREA SEL :
configure eight mask area.
AREA MODE
mask
:
area display.
TOP :
to move the mask area up.
B
OTTOM :
to move the mask area down.
LEFT :
to move the mask area left.
RIGHT
:
to move the mask area right.
MASK COLOR:
Adjust desired
mask
colir
level.
GROUP SEL
AREA SEL
AREA MODE
Color
TOP
BOTTOM
LEFT
RIGHT
EXIT
SPECIAL SETUP
USER PRESET
PRIVACY
Day/Night
DIS
SYNC
COMM Addition
IMAGE Addition
EXIT
SKT PRIVACY
GROUP 1
AREA 1
ON
5
45
110
45
95
OFF
OFF
OFF
AUTO
INT
COLOR :
color mode.
B/W
B/W
:
mode.
AUTO :
the camera automatically detects lighting conditions
and selects the mode accordingly.
EXIT.
RET PKT :
Used to transfer a packet.
UART MODE :
Configure parity bit to NON,
EVEN,
or
ODD. DATA
bit
is set to 8 bit, and stop bit 1 bit. Set the UART MOD
E to EVEN if
using the remote controller.
BAUD RATE :
Configure baud rate from 2400/4800/9600/19200
/38400/57600 bps.
DISP CAM ID :
Displays camera ID on top left comer of the screen.
CAM ID :
Assign an ID number to the camera ( 1-255).
IMAGE ADJ:
Includes image quality or special
function
factor
PREEZE:
use this feature to freeze capture an image.
H-REV:
Use this feature to horizontally inverse the screen.
V-REV:
Use the feature to vertically inverse the screen.
SHARPNESS:
Increase this value sharpens object edges. Too high
of a setting. however, produces noise and may obscure the image.
COLOR:
Adjusting this value affects the chroma level only; the
burst level is unaffected.
EXIT
EXIT:
evert back to the USER PRESET menu.
RESET
To reset your camera to factory default condition.
EXIT
To finish setup menu.
FREEZE
H-REV
V-REV
SHARPNESS
COLOR
END
IMABZE SETUP
ON
OFF
OFF
ON
50
23X,f=3.84mm to
88.4mm (F1.6 to 3.2)
1200mm
V: 40.3 ( near focus) to 2.36 (far focus)
V: 52.2 ( near focus) to 2.36 (far focus)
Color:0.4lux/f1.6 (50 ire)
B/W: 0.1Lux/F1.6 (50 IRE)
Sens-up:0.0006Lux/F1.6 (50 IRE)
DLF1102
Summary of Contents for DLF1102
Page 2: ...1 ...
