DA44AU
USER MANUAL
05
contact
|
Audio Input Settings
The DA44AU supports both line level input and microphone input including 48V phantom power. The input level
sensitivity can also be adjusted to accomodate various source devices. This can be achieved through the front
display menu, using the rotary dial, or via RS-232.
The Audio Input Settings are as follows:
CHANNEL
INPUT TYPE
SENSITIVITY
PHANTOM POWER
A
B
C
D
Microphone
0dB
5dB
10dB
15dB
25dB
35dB
On
Off
Line
-10dB
0dB
Dante® Controller software is required in order to setup and configure the DA44AU as well as control your Dante®
network. Audinate provide extensive training videos and documentation on their website. This can be found here:
http://www.audinate.com/products/software/dante-controller
Upon connecting your DA44AU to a compatible network, the Dante® Controller software should automatically
discover the device. The DA44AU will appear in the Dante® Controller with a name “DA44AU”. On the “Routing”
screen you can create audio routing between Dante® transmitters and receivers in your system.
Note:
It is not possible to route audio input into the DA44AU to an output within the same DA44AU due to limitation
in the Dante
®
Ultimo chipset.
Dante® Controller
RevA3_User_Manual_DA44AU
