12
11
左右相同安装。并调整垂直尾翼与机身垂直。
Install the left and right in same method,and
adjust the vertical tail make sure it is vertical
with fuselage.
尼龙线
Nylon wire
05-7
安装马达时设置右拉，下拉角度2°
Pls set the control throw to the right/
down as 2 ° when installing the motor.
M3*18mm
06
Install the moto and scale parts
安装马达，像真件
橡胶条
Rubber strip
进气管
Intake pipe
06-1
06-2
06-3
自攻螺丝
Self-tapping screw
M1.5x10mm
在马达座上涂抹环氧胶，然后把马达
座装入机身头部，并调整合适伸出长
度，调整好后可用夹子辅助固定住马
达座，待胶干固后取下夹子。
Apply epoxy glue on the motor
base, then install the motor base
into the head of the fuselage, and
adjust the appropriate extension
length.
After adjustment, fix the motor
base with the help of a clip,and
remove the clip after the glue is
dry.
飞行员放置座
pilot seat
06-4
06-5
06-6
螺丝 Screw+螺母 Nut
M2*15mm
05-8
自攻螺丝
Self-tapping screw
M1.5x10mm
螺丝 Screw+螺母 Nut
M2*15mm
螺丝 Screw+螺母 Nut
M2*20mm
螺丝 Screw
M3
爪牙螺母 Nut
X3
