2. Product brief introduction
2.1 Product configuration and technical parameters
2
.
2 Structure
1.
Display & Buttons
This area shows a general working status of the machine and buttons for different functions.
2.
Hot water tap
If you want to get hot water, you can put cup or glass under it, and push the red lever, while
at the same time, push the button above
3.
Normal water tap
If you want to get normal water, you can put cup or glass under it, and push the yellow lever.
4.Cold water tap
If you want to get cold water, you can put cup or glass under it, and push the blue lever.
5.
Drip tray
This is a tray for holding a little waste water. You can take it out when it is full.
6.
Lower panel
The lower panel is the cover for filters, can be disassembled for filters change. Please refer
to the instructions for filters replacement.
8.
Cooling power switch
Switch on to start the water cooling.
9.
Heating power switch heating.
Switch on to start the water heating
10.Condenser
This is part of cooling elements connect to compressor
11.Cold water outlet
It is used the first time you use the machine or long time without using it. You can screw out
the cap to release the water from the cold tank to clean the tank .
12.
Hot water outlet
It is used the first time you use the machine or long time without using it. You can screw out
the cap to release the water from the hot tank to clean the tank.
13.
Water inlet
It is connected with a PE tube to water tap, water then will come from your tap water into the
machine
14.
Drain water outlet
There will be some drain water coming out from this outlet when machine operates
Model
DANPURE LUXE 75
Description
Hot and cold water dispenser
Mode type
RO system
Power
220-240V
/
50Hz
Rated power
640W
Heating capacity
6L/H ( 90
'
C
)
Cooling capacity
2L/H ( 10
'
C
)
Applicable water quality
Municipal tap water
Applicable water pressure
0.1-0.6 Mpa
Ambient temperature
5-38
'
C
Package size
320x360x933 mm
