2
5. Connecting to 10/100Mbps N-Way Device
Converter
TP Port
Default: 100Mbps auto-duplex-negotiation
a.
Full-duplex for 10/100 N-Way partner
b.
Half-duplex for non N-Way TP partner or Class II Hub
Converter
Fiber Port
100Mbps and comes to:
a.
Full-duplex for 100Fdx fiber link partner
b.
Half-duplex for 100Hdx fiber link partner
Note:
—
TP Partner must be set at 10/100 N-Way Auto-Negotiation for full duplex operation. When
connecting to non N-Way TP partner, it will come to 100/half-duplex operation
—
Fiber Link Partner should be set at full duplex mode
6. LED
Description
LED
Color
Function
FX Tx
Green
Blink when fiber data is transmitting
FX Link
Green
Lit when fiber connection is good
Blink when fiber data is receiving
TX Tx
Green
Blink when TP data is transmitting
TX Link
Green
Lit when TP connection is good
Blink when TP data is receiving
FDX
Green
Lit when full-duplex mode is active
PWR
Green
Lit when +5V power is coming up
7. Cable Connection Parameter
100Base-X network allows 512-bit time delay between any two node-stations in a collision domain.
The overall bit-time of TP/Fiber wires and devices must be within 512-bit in a segment. You may
use a switch to break up collision domain and extend the cabling distance.
•
TP Cable Limitations: Cat. 5 100m
•
Multi-Mode Converters Fiber Cable Limitations:
2km in Full-Duplex mode and 412m in Half-Duplex mode
•
Single-Mode Converters Fiber Cable Limitations (Full-Duplex ONLY):
CFM3800 Single-Mode Converter:
C20
:
20km
C40
:
40km
C60
:
60km
C80
:
80km
C100
:
100km
8. DC Jack and AC-DC Power Adapter
The DC jack’s central post is 2.5mm wide; it conforms to the DC receptacle (2.5mm) on the 19-
inch Converter Rack slot.
Keep the AC-DC adapter as spare parts
when Media Converter is installed in a
19-inch Media Converter Rack.
9. Technical
Specifications
•
Standards: IEEE 802.3u 100Base-TX/FX
•
Models:
Model
Connector Type
CFM3000
Multi-Mode 1310nm Duplex-SC
↔
RJ-45
CFM3200
Multi-Mode 1310nm Duplex-ST
↔
RJ-45
CFM3800C20/C40/C60
Single-Mode 1310nm Duplex-SC
↔
RJ-45
CFM3800C80/C100
Single-Mode 1550nm Duplex-SC
↔
RJ-45
*:
Models with MT-RJ or VF-45 fiber connector are available only upon request!
•
UTP Cable: Category 5, up to 100m
•
Fiber Cable:
50/125, 62.5/125, or 100/140µm multi-mode, up to 2km
8.3/125, 8.7/125, 9/125, or 10/125µm single-mode, up to 20~100km (models depended)
•
LED Indicators: POWER, FX LNK, FX Tx, TX LNK, TX Tx, FDX
•
Data Transfer Rate:
100Mbps auto-duplex-negotiation
100Mbps for half-duplex mode
200Mbps for full-duplex mode
•
Power Requirement: 1A@+5V DC
•
Ambient Temperature: 0° to 50° C
•
Humidity: 5% to 90%
•
Dimensions: 26.2 x 70.3 x 94 mm (H x W x D)
•
Complies with FCC Part 15 Class A and CE Mark
Note: Connecting to Router, Bridge, or switch, please refer to the device’s Technical Manual.