Dannmar MAXJAX TILT, User Manual

Page: 4 / 28

3
IMPORTANT NOTICE
1.
Read this manual thoroughly before installing, operating, or maintaining this lift.
2.
This lift is designed for indoor/outdoor use and should not be installed in a pit or depression.
3.
When not in use, store in cool, dry interior space.
4.
The floor/surface on which the lift is to be used should be smooth and flat as possible.
5.
The lift has specific mechanical requirements as described in the Installation Instructions section of this
manual.
6.
This lift has a minimum ground clearance requirement as described in the Installation Instructions section
of this manual.
7.
Failure by the owner to provide the recommended shelter (when not in use), mounting surface,
power drill requirement and ceiling height could result in unsatisfactory lift performance, property
damage, or personal injury.
8.
Do not attempt to install this lift if you have never been trained on basic automotive lift installation
procedures.
9.
Stay clear of any moving parts that can fall and cause injury. These instructions must be followed
to insure proper installation and operation of your lift.
10.
Dannmar Equipment will assume no liability for loss or damage of any kind, expressed or implied
resulting from improper installation or use of this product.
11.
This lift is rated to 6,600-lbs lifting capacity. NEVER EXCEED rated lifting capacity of lift.
12.
Qualified person must be consulted for seismic loads and other local or state requirements.
BE SAFE: YOUR NEW LIFT WAS DESIGNED AND BUILT WITH SAFETY IN MIND. HOWEVER, YOUR OVERALL
SAFETY CAN BE INCREASED WITH PROPER TRAINING AND THOUGHTFUL OPERATION ON THE PART OF THE
OPERATOR.
DO NOT OPERATE OR REPAIR THIS EQUIPMENT WITHOUT READING THIS MANUAL AND THE
IMPORTANT SAFETY INSTRUCTIONS SHOWN INSIDE. KEEP THIS OPERATION MANUAL NEAR THE LIFT AT ALL
TIMES. MAKE SURE THAT
ALL USERS READ AND UNDERSTAND THIS MANUAL.