5. C Call.
Press to transmit calling tone.
6. Enter.
Used for MENU choice and to turn the LCD screen lamp ON / OFF (Lamp will
automatically shut down after 4 seconds if no other buttons have been pressed). When pressed for 3
seconds a KEY icon shows on the display and the volume and channel operations are disabled. Press
and hold the Enter button again to deactivate this button lock mode.
7. Speaker.
8. Battery compartment on the rear.
Install 4 x 1.5V AAA alkaline or rechargeable batteries. Be
careful with + – polarisation when fitting the batteries. (Batteries are not included)
A battery indicator shows the actual level. If the indicator flashes when transmitting the batteries
should be replaced or charged depending on the battery type.
9. Battery latch on the rear.
Pull the latch down to open the battery cover.
10. Microphone.
Speak 2” from the radio - clearly in a normal voice.
11. M Monitor.
Removes the squelch (noise filter) function so you can hear all signals and noise on
the selected frequency.
12. MENU.
Press once and channel number can be changed by pressing button 3 or 4. When you press
several times you will step through the MENU.
13. PTT - Push to talk.
Press to transmit.
14. ON / OFF.
Hold the button down for 2 seconds and the unit turns ON or OFF.
15. Transmit lamp.
Shows red colour when the radio is transmitting.
16. SP/Mic jack.
Extra accessories can be connected here. Headset – microphones and charger.
17. Belt Clip.
Pulling the belt clip latch upwards and pulling the belt clip up at same time will remove
clip.
DISPLAY
