Daniela DAN9MTB, User Manual

Page: 5 / 11

P I 02 9604 1226 E I sales@danielaappliances.com.au W | danielaappliances.com.au
PA G E 9
P I 02 9604 1226 E I sales@danielaappliances.com.au W | danielaappliances.com.au
PA G E 8
CONNECTION OF THE OVEN
NOTE: The number of accessories included depends on the particular appliance purchased.
INSTALLATION
C575
B595
A595
G560
F570
min.
H560
D60 6
E600
80
250
100
Remark:
1.Only plus deviations are admissible for all dimension.
2.The cabinet is not include the power switch or socket.
CONNECTION OF THE OVEN
L
N
12
VENTILATING OPENINGS
When cooking is finished or in pause state or in waiting state, if the oven's center temperature is
over 75 degree, the cooling fan will continue working for 15 minutes. Or when the oven's center
temperature becomes lower than 75 degree, the cooling fan will stop in advance.
Ventilating openings
BULB REPLACEMENT
For replacement, process as follows:
1.
Disconnect power from the mains outlet or switch
off the circuit breaker of the unit’s mains outlet.
2. Unscrew the glass lamp cover by turning it
counter-clockwise (note, it may be stiff) and replace
the bulb with a new one of the same type.
3. Screw the glass lamp cover back in place.
NOTE : Only use 25-40W/220V-240V, T300°C halogen lamps.
SHELF PLACEMENT WARNING
• To ensure the oven shelves operate safely, correct placement of the shelves between
the side rail is imperative. Shelves and the pan only can be used between the first and
fifth layers.
• The shelves should be used with the right direction, it will ensure that during careful
removal of the shelf or tray, hot food items should not slide out.
VENTILATING OPENINGS
When cooking is finished or in pause state or in waiting state, if the oven’s centre temperature
is over 750C, the cooling fan will continue working for 15 minutes. Or when the oven’s centre
temperature becomes lower than 750C, the cooling fan will stop in advance.
Ventilating
openings
NOTE: The number of accessories included depends on the particular appliance purchased.
INSTALLATION
C575
B595
A595
G560
F570
min.
H560
D60 6
E600
80
250
100
Remark:
1.Only plus deviations are admissible for all dimension.
2.The cabinet is not include the power switch or socket.
CONNECTION OF THE OVEN
L
N
12
VENTILATING OPENINGS
When cooking is finished or in pause state or in waiting state, if the oven's center temperature is
over 75 degree, the cooling fan will continue working for 15 minutes. Or when the oven's center
temperature becomes lower than 75 degree, the cooling fan will stop in advance.
Ventilating openings
BULB REPLACEMENT
For replacement, process as follows:
1> Disconnect power from the mains outlet or switch off the circuit breaker of the unit's mains outlet.
2> Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace
the bulb with a new one of the same type.
3> Screw the glass lamp cover back in place.
NOTE: Only use 25-40W/220V-240V , T300°C halogen lamps.
SHELF PLACEMENT WARNING:
SECURING THE OVEN TO THE CABINET
1. Fit oven into the cabinet recess.
2. Open the oven door.
3. Secure the oven to the kitchen cabin
e t with two
distance holders "A" which fit the holes in the oven
frame and fit the two screws "B".
11
To ensure the oven shelves operate safely, correct placement of the shelves between the side rail
is imperative. Shelves and the pan only can be used between the first and fifth layers.
The shelves should be used with the right direction, it will ensure that during careful removal of the
shelf or tray, hot food items should not slide out.
OR
BULB REPLACEMENT
For replacement, process as follows:
1> Disconnect power from the mains outlet or switch off the circuit breaker of the unit's mains outlet.
2> Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace
the bulb with a new one of the same type.
3> Screw the glass lamp cover back in place.
NOTE: Only use 25-40W/220V-240V , T300°C halogen lamps.
SHELF PLACEMENT WARNING:
SECURING THE OVEN TO THE CABINET
1. Fit oven into the cabinet recess.
2. Open the oven door.
3. Secure the oven to the kitchen cabin
e t with two
distance holders "A" which fit the holes in the oven
frame and fit the two screws "B".
11
To ensure the oven shelves operate safely, correct placement of the shelves between the side rail
is imperative. Shelves and the pan only can be used between the first and fifth layers.
The shelves should be used with the right direction, it will ensure that during careful removal of the
shelf or tray, hot food items should not slide out.
OR
INSTALLATION INSTALLATION