P
I
02 9604 1226 E
I
|
danielaappliances.com.au
PAG E 2 3
IMPORTANT!
If the drip tray is not emptied regularly, the water could overflow from the edge and seep inside
or around the coffee maker. This could damage the appliance and cabinet.
IMPORTANT!
The grounds tray mush be emptied, each time the drip tray is removed, as removing the tray
resets its internal coffee puck counter. Failure in emptying grounds tray when drip tray is
removed will result in the coffee pucks overflowing and clogging your machine internally.
CLEANING THE WATER TANK
• Clean the water tank (A11) at least once a month with a damp cloth and a little mils dish
washing liquid.
• Clean to remove all washing up liquid residues, then rinse the water tank thoroughly.
CLEANING THE SPOUTS
• Clean the spouts periodically using a sponge or cloth.
• Check regularly that the holes in the coffee spouts are not blocked. If necessary use an
“arts and crafts” pipe cleaner to unclog and clean it.
WARNING!
Before performing any cleaning operations, the machine must be turned off by shut off the main
switch (A5) and unplugged from the mains power supply. Never immerse the coffee maker in water.
INTERNAL BREWING UNIT (INFUSER)
When you make total 300 cups of coffee, LCD will display “clean brew”. You can continue to use
your machine while this is displayed however, we suggest to customers to do this clean program
as soon as possible.
Proceed as follows:
1. When machine display “clean ready”.
2. Press down on B8 button until the machine displays “empty ready”.
3. Extract the drip tray and all waste water as well as grounds container, empty and return back
to machine.
4. Place a jug/small bowl under the coffee spouts.
5. The machine will then machine display “add tablet”.
6. Insert tablet into the pre-ground shute. Coffee machine cleaning tablets for fully automatic.
coffee machines can be purchased from any major coffee machine retailer.
7. Press B8 button to commence the cleaning program. Machine will then display “cleaning”.
8. When cleaning cycle is complete the machine will return back to “ready” state.
9. Empty drip tray and grounds container. Rinse away soap residue and replace.
