Daniamant Dan W3-1 Installation And Maintenance Instructions Manual Download Page 6

Page: 6 / 12

Installation

The Dan W3-2 is for use on all types of lifejackets.

The Dan W3-2 is supplied with a fixing clip. The clip is intended to be placed

behind a strip of lifejacket material or reflective tape; the light is secured by

pressing it into the clip.

Light and fixing clip (part no.1950 for grey standard clip, for 1” w part no. 1952 Clips 2, for 2”

webbing) separated to show material path

It is the responsibility of the lifejacket manufacturer to ensure that the light is

attached securely and is in the correct position on the lifejacket to provide

maximum visibility when the wearer is in the water.

Operation

The DAN W3-2 is switched on automatically when the sensor is immersed in

water, and can be switched off by pressing the on/off button for one second.

The light can also be activated and deactivated manually by pressing the on/off

button for one second.

The sensor on the cable can be tested by a metal clip.

Figure depicts the Sensor Switch and the Manual ON/OFF Button

ON/OFF

Button

Sensor

Switch

p/n. 1950

p/n. 1952

Summary of Contents for Dan W3-1












