2
Installation
The Dan M3 is for use on all types of lifejackets.
The Dan M3 is supplied with a fixing clip. The clip is intended to be placed behind
a strip of lifejacket material or reflective tape; the light is secured by pressing it
into the clip.
Light and Fixing clip (part no. 1950 for standard grey clip) separated to show
material path.
It is the responsibility of the lifejacket manufacturer to ensure that the light is
attached securely and is in the correct position on the lifejacket to provide
maximum visibility when the wearer is in the water.
Operation
The DAN M3 is switched on by pressing the on/off button and can be deactivated
by pressing the button again.
Figure depicts the manual
‘ON/OFF button’
ON/OFF
Button
