4 |
DANGEROUS MUSIC
sources.
External: Selecting this button will make the Convert-2 slave to an external word clock source. For example, if utilizing
a master studio clock, this would distribute WC to the Convert-2.
Master: Depress the button for 5 seconds. The LED will blink. Now the Convert-2 is the master studio clock and other
digital sources will slave to it. Audition the difference.
Note:
When in Master clock mode, the sample rate must be manually selected and the destination devices must be set to the
identical sample rate (i.e. all units at 192kHz).
Tip:
,
Try utilizing the Convert-2 as the master clock. Our high profile beta testers found it “remarkably revealing & detailed”
and “...this is the best sounding clock auditioned to date- and we’ve tried everything.”
Footnote: The Convert-2 leverages JetPLL*, widely regarded as one of the lowest jitter clock designs in the world. As expected,
Dangerous diverges from other manufacturers through a custom implementation of the JetPLL that exceeds its design
specification for jitter performance.
7. BYPASSABLE VOLUME CONTROL (OUTPUT TRIM)
[OUTPUT TRIM SECTION PICTURED ABOVE]
Feature: Custom Potentiometer.
Benefit: This custom pot provides two options.
1. Use it as a volume knob, with the Analog Outputs connected directly to a pair of studio monitors.
2. Turned fully clockwise, a small detent will be detected, triggering a relay, thus removing the pot entirely from the
signal path and allowing the user to utilize a separate, dedicated monitor controller (i.e. Dangerous Monitor ST).
Convert-2: Rear Panel Connections
8. ANALOG OUTPUT
[REAR PANEL ANALOG OUTPUTS PICTURED ABOVE]
Summary of Contents for Convert-2
Page 1: ...CONVERT 2 USER GUIDE ...
