ADDITIONAL SWITCHING SYSTEM
®
| 17
REMOTE
CONTROL
The DAC-ST is controlled by the Dangerous ST Remote.
On the Monitor ST Remote, first use the “UP” and “DOWN” buttons to select the appropriate bank.
The Remote’s LEDs will verify which bank is active.
Then choose the input by using the “Additional Switching” 1-4 buttons.
This is how the Additional Switching remote buttons can control up to 4 devices.
See the following photo op for visual alacrity.
Tip:
,
If you only have one Additional Switching System®, only banks 1-2 will be selectable.
Tip:
,
Ensure that the input for the DAC-ST is set to stereo and not 5.1.
[Half of the Monitor ST Remote pictured above]
