Danfoss VLT series, Programming Manual

Page: 99 / 241

13-01 Start Event
Option: Function:
[22] Comparator 0 Use the result of comparator 0 in the
logic rule.
[23] Comparator 1 Use the result of comparator 1 in the
logic rule.
[24] Comparator 2 Use the result of comparator 2 in the
logic rule.
[25] Comparator 3 Use the result of comparator 3 in the
logic rule.
[26] Logic rule 0 Use the result of logic rule 0 in the
logic rule.
[27] Logic rule 1 Use the result of logic rule 1 in the
logic rule.
[28] Logic rule 2 Use the result of logic rule 2 in the
logic rule.
[29] Logic rule 3 Use the result of logic rule 3 in the
logic rule.
[33] Digital input DI18 Use the value of DI18 in the logic rule
(High = TRUE).
[34] Digital input DI19 Use the value of DI19 in the logic rule
(High = TRUE).
[35] Digital input DI27 Use the value of DI27 in the logic rule
(High = TRUE).
[36] Digital input DI29 Use the value of DI29 in the logic rule
(High = TRUE).
[37] Digital input DI32 Use the value of DI32 in the logic rule
(High = TRUE).
[38] Digital input DI33 Use the value of DI33 in the logic rule
(High = TRUE).
[39] Start command This event is TRUE if the frequency
converter is started by any means
(either via digital input, field bus or
other).
[40] Drive stopped This event is TRUE if the frequency
converter is stopped or coasted by
any means (either via digital input,
fieldbus or other).
[41] Reset Trip This event is TRUE if the frequency
converter is tripped (but not trip-
locked) and the reset button is
pressed.
[42] Auto Reset Trip This event is TRUE if the frequency
converter is tripped (but not trip-
locked) and an Automatic Reset is
issued.
[43] OK Key This event is TRUE if the OK key on
the LCP is pressed.
13-01 Start Event
Option: Function:
[44] Reset Key This event is TRUE if the Reset key on
the LCP is pressed.
[45] Left Key This event is TRUE if the Left key on
the LCP is pressed.
[46] Right Key This event is TRUE if the Right key on
the LCP is pressed.
[47] Up Key This event is TRUE if the Up key on
the LCP is pressed.
[48] Down Key This event is TRUE if the Down key on
the LCP is pressed.
[50] Comparator 4 Use the result of comparator 4 in the
logic rule.
[51] Comparator 5 Use the result of comparator 5 in the
logic rule.
[60] Logic rule 4 Use the result of logic rule 4 in the
logic rule.
[61] Logic rule 5 Use the result of logic rule 5 in the
logic rule.
[76] Digital Input x30 2
[77] Digital Input x30 3
[78] Digital Input x30 4
[90] ECB Drive Mode
[91] ECB Bypass Mode
[92] ECB Test Mode
[100] Fire Mode
13-02 Stop Event
Option: Function:
Select the boolean (TRUE or FALSE)
input to deactivate Smart Logic
Control.
[0]
*
False Enters the fixed value of FALSE in the
logic rule.
[1] True Enters the fixed value TRUE in the
logic rule.
[2] Running See parameter group 5-3* for further
description.
[3] In range See parameter group 5-3* for further
description.
[4] On reference See parameter group 5-3* for further
description.
[5] Torque limit See parameter group 5-3* for further
description.
[6] Current limit See parameter group 5-3* for further
description.
[7] Out of current
range See parameter group 5-3* for further
description.
Parameter Description
VLT
®
HVAC Drive Programming Guide
98 MG.11.CC.02 - VLT
®
is a registered Danfoss trademark
3 3