manualshive.com logo in svg

Danfoss VLT MSD 510, Operating Manual, Page: 87 / 246

Share
Download
Danfoss VLT MSD 510 Operating Manual Download Page 87

The library contains:

•

Function blocks for controlling and monitoring the ISD 510/DSD 510 servo drives, servo drive modules SDM 511/SDM 512, and the

system modules.

•

Function blocks for all available motion commands of the ISD 510/DSD 510 servo drives and SDM 511/SDM 512 servo drive

modules.

•

Function blocks for controlling and monitoring the PSM 510, DAM 510, and ACM 510.

•

Function blocks and structures for creating 

Basic CAM

 profiles.

•

Function blocks and structures for creating 

Labeling CAM

 profiles.

6.11 Programming with Automation Studio™

6.11.1 Requirements for Programming with Automation Studio™

The following files are required to integrate the ISD 510/DSD 510 servo drives, the SDM 511/SDM 512 servo drive modules, and the
system modules into an Automation Studio™ project:

•

Package of libraries for the MSD 510 servo system: Danfoss_VLT_ServoMotion_V_x_y_z.zip

•

XDD file (XML Device Description) for the standard ISD 510 servo drive: 0x0300008D_ISD510_S.xdd

•

XDD file (XML Device Description) for the advanced ISD 510 servo drive: 0x0300008D_ISD510_A.xdd

•

XDD file (XML Device Description) for the standard DSD 510 servo drive: 0x0300008D_DSD510_S.xdd

•

XDD file (XML Device Description) for the advanced DSD 510 servo drive: 0x0300008D_DSD510_A.xdd

•

XDD file (XML Device Description) for the SDM 511/SDM 512 servo drive module: 0x0300008D_SDM510.xdd

•

XDD file (XML Device Description) for the Power Supply Module (PSM 510): 0x0300008D_PSM.xdd

•

XDD file (XML Device Description) for the Decentral Access Module (DAM 510): 0x0300008D_DAM.xdd

•

XDD file (XML Device Description) for the Auxiliary Capacitors Module (ACM 510): 0x0300008D_ACM.xdd

6.11.2 Creating an Automation Studio™ Project

The procedures described in this chapter apply to Automation Studio™ Versions 3.0.90 and V4.x unless otherwise specified.

Information on how to install Automation Studio™ can be found in detail in the Automation Studio™ help. Open the B&R Help Explorer
and go to [Automation software 

→ 

Software Installation 

→ 

Automation Studio].

Information on how to create a project in Automation Studio™ can be found in detail in the Automation Studio™ help.

V3.0.90:

Open the B&R Help Explorer and go to [Automation Software 

→ 

Getting Started 

→ 

Creating programs with Automation Studio 

→ 

First

project with X20 CPU].

V4.x:

Open the B&R Help Explorer and go to [Automation Software 

→ 

Getting Started 

→ 

Creating programs with Automation Studio 

→

Example project for a target system with CompactFlash].

Commissioning

Operating Guide  | VLT® Multiaxis Servo Drive MSD 510 System

AQ262450196490en-000101 / 175R1170| 87

Danfoss A/S © 2019.10

Summary of Contents for VLT MSD 510























































































































































































































































Reviews:

No comments