manualshive.com logo in svg

Danfoss VLT MSD 510, Operating Manual, Page: 146 / 246

Share
Download
Danfoss VLT MSD 510 Operating Manual Download Page 146

NOTICE

-

See the VLT

®

 Servo Drive System ISD 510, DSD 510, MSD 510 Programming Guide for further information on the

available function blocks and their behavior.

6.18.2 Simple Programming Template

TwinCAT

®

:

A basic sample PLC application for starting up the servo system with 1 Power Supply Module (PSM 510), 1 Decentral Access Module
(DAM 510), and 2 axes is provided. The project 

DDS_ServoMotion_SampleProject

 can be downloaded from the Danfoss website.

Automation Studio™:

Detailed information on how to open the sample project within the ISD package in Automation Studio™ can be found in the
Automation Studio™ Help. Open the B&R Help Explorer and go to [Programming 

→ 

Examples 

→ 

Adding sample programs] and follow

the instructions for library samples.

PROFINET

®

The project 

DDS_ServoMotion_SampleProject

 is a basic sample PLC (C240PN) application for starting up the servo system with 1 Power

Supply Module (PSM 510), 1 Decentral Access Module (DAM 510), and 2 axes.

Commissioning

Operating Guide  | VLT® Multiaxis Servo Drive MSD 510 System

AQ262450196490en-000101 / 175R1170

146 | Danfoss A/S © 2019.10

Summary of Contents for VLT MSD 510























































































































































































































































Reviews:

No comments