2.1.7 Available literature
Available Literature for the frequency converter
-
The VLT AutomationDrive Operating Instructions
provide the neccessary information for getting
the frequency converter up and running.
-
The VLT AutomationDrive Design Guide entails all
technical information about the frequency
converter design and applications including
encoder, resolver and relay options.
-
The VLT AutomationDrive MCT 10 Operating
Instructions provide information for installation
and use of the software on a PC.
-
The VLT AutomationDrive IP21 / Type 1
Instruction provides information for installing the
IP21 / Type 1 option.
-
The VLT AutomationDrive 24 V DC Backup
Instruction provides information for installing the
24 V DC Backup option.
Danfoss Drives technical literature is also available online
at www.danfoss.com/drives.
2.1.8 ODVA Conformance
The EtherNet/IP option is conformance tested to ODVA
add. industrial graded.
2.1.9 Abbreviations
Abbreviation
Definition
API
Actual Packet Interval
CC
Control Card
CIP
Common Industrial Protocol
CTW
Control Word
DHCP
Dynamic Host Configuration Protocol
EIP
EtherNet/IP
EMC
Electromagnetic Compatibility
I/O
Input/Output
IP
Internet Protocol
LCP
Local Control Panel
LED
Light Emitting Diode
LSB
Least Significant Bit
MAR
Major Recoverable fail
MAU
Major Unrecoverable fail
MAV
Main Actual Value (actual output)
MSB
Most Significant Bit
MRV
Main Reference Value
N/A
Not applicable
ODVA
Open DeviceNet Vendor Association
PC
Personal Computer
PLC
Programmable Logic Controller
PNU
Parameter Number
REF
Reference (= MRV)
RTC
Real Time Clock
STP
Spanning tree Protocol
STW
Status Word
Introduction
MCA 121 EtherNet/IP
MG.90.J3.02 - VLT
®
is a registered Danfoss trademark
5
2
2
