10 Decommissioning and Disposal
10.1 Decommissioning
The procedure for decommissioning the connection box is
the reverse of the installation procedure described in
.
Proceed as follows:
•
Disconnect the power supply and wait for the
discharge time to elapse.
10.2 Dismounting
The procedure for dismounting the connection box is the
reverse of the fitting procedure described in
Proceed as follows:
1.
Disconnect the power supply and wait for the
discharge time to elapse.
2.
Disconnect the electrical cables.
3.
Dismount the connection box.
10.3 Recycling and Disposal
10.3.1 Recycling
Take metals and plastics to recycling stations.
The entire connection box is classified as electronic waste,
and the packaging is classified as packaging waste.
10.3.2 Disposal
Devices containing electronic components cannot be
disposed of as normal domestic waste.
Dispose of the connection box as hazardous waste,
electrical waste, recyclable waste, etc. in accordance with
applicable local regulations.
Decommissioning and Disposa...
VLT
®
ISD Connection Box Operating Instructions
44
MG75G102 - VLT
®
is a registered Danfoss trademark
10
10