23-81 Energy Cost
Range:
Function:
1.00 N/A* [0.00 - 999999.99 N/A]
Set the current cost for a kWh in local currency. If the energy cost is changed later on, it will impact
the calculation for the entire period!
23-82 Investment
Range:
Function:
0 N/A*
[0 - 999999999 N/A]
Set the value of the investment spent on upgrading the plant with speed control, in same currency
as used in par.23-81
23-83 Energy Savings
Range:
Function:
0 kWh*
[0 - 0 kWh]
This parameter allows for a readout of the accumulated difference between the reference power
and the actual output power.
If the motor size is set in HP (par.1-21
), the equivalent kW value will be used for
the Energy Savings.
23-84 Cost Savings
Range:
Function:
0 N/A*
[0 - 2147483647 N/A]
This parameter allows a readout of the calculation based on the above equation (in local currency).
VLT
®
HVAC Drive Programming Guide
3 Parameter Description
MG.11.C6.22 - VLT
®
is a registered Danfoss trademark
3-227
3