Danfoss VLT HVAC Drive FC 102, Programming Manual, Page: 27 / 250

3.2 Parameters: 0-** Operation and Display
Parameters related to the fundamental functions of the
frequency converter, function of the LCP keys and configu-
ration of the LCP display.
3.2.1 0-0* Basic Settings
0-01 Language
Option: Function:
Defines the language to be used in the
display.
The frequency converter can be delivered
with 2 different language packages.
English and German are included in both
packages. English cannot be erased or
manipulated.
[0]
*
English Part of Language packages 1 - 2
[1] Deutsch Part of Language packages 1 - 2
[2] Francais Part of Language package 1
[3] Dansk Part of Language package 1
[4] Spanish Part of Language package 1
[5] Italiano Part of Language package 1
[6] Svenska Part of Language package 1
[7] Nederlands Part of Language package 1
[10] Chinese Language package 2
[20] Suomi Part of Language package 1
[22] English US Part of Language package 1
[27] Greek Part of Language package 1
[28] Bras.port Part of Language package 1
[36] Slovenian Part of Language package 1
[39] Korean Part of Language package 2
[40] Japanese Part of Language package 2
[41] Turkish Part of Language package 1
[42] Trad.Chinese Part of Language package 2
[43] Bulgarian Part of Language package 1
[44] Srpski Part of Language package 1
[45] Romanian Part of Language package 1
[46] Magyar Part of Language package 1
[47] Czech Part of Language package 1
[48] Polski Part of Language package 1
[49] Russian Part of Language package 1
[50] Thai Part of Language package 2
[51] Bahasa
Indonesia
Part of Language package 2
0-01 Language
Option: Function:
[52] Hrvatski Part of Language package 2
0-02 Motor Speed Unit
Option: Function:
NOTICE
This parameter cannot be adjusted while the
motor is running.
The information shown in the display depends on
settings in
parameter 0-02 Motor Speed Unit and
parameter 0-03 Regional Settings . The default settings
of
parameter 0-02 Motor Speed Unit
and
parameter 0-03 Regional Settings
depend on to which
region of the world the frequency converter is
supplied. It can be reprogrammed as required.
NOTICE
Changing the motor speed unit resets certain
parameters to their initial value. Select the
motor speed unit before modifying other
parameters.
[0] RPM Selects display of motor speed variables and
parameters (that is references, feedbacks, and limits)
in terms of motor speed (RPM).
[1]
*
Hz Selects display of motor speed variables and
parameters (that is references, feedbacks, and limits)
in terms of output frequency to the motor (Hz).
0-03 Regional Settings
Option: Function:
WARNING
This parameter cannot be adjusted while
the motor is running.
The display showing depends on the settings in
parameter 0-02 Motor Speed Unit and
parameter 0-03 Regional Settings . The default
settings of parameter 0-02 Motor Speed Unit and
parameter 0-03 Regional Settings depends on which
region of the world the frequency converter is
supplied to, but can be re-programmed as
required.
The settings not used are made invisible.
[0] Interna-
tional
Sets parameter 1-20 Motor Power [kW] units to [kW]
and the default value of parameter 1-23 Motor
Frequency [50 Hz].
[1] North
America
Sets parameter 1-21 Motor Power [HP] units to [hp]
and the default value of parameter 1-23 Motor
Frequency to 60 Hz.
Parameter Descriptions Programming Guide
MG11CE02 Danfoss A/S © 03/2015 All rights reserved. 25
3 3