Danfoss VLT HVAC Drive FC 102, Instruction Manual

Page: 38 / 140

3.4.11 Installation of Input Plate Options
This section describes the field installation of input option kits available for adjustable frequency drives in all E enclosures.
Do not attempt to remove RFI filters from input plates. Damage may occur to RFI filters if they are removed from the input
plate.
NOTICE!
Two different types of RFI filters are available, depending on the input plate combination and whether the RFI filters are
interchangeable. Field installable kits are, in certain cases, the same for all voltages.
380–480 V
380–500 V Fuses Disconnect fuses RFI RFI fuses RFI disconnect
fuses
E1 FC 102/FC 202: 315 kW
(430 hp)
FC 302: 250 kW (350
hp) 176F0253 176F0255 176F0257 176F0258 176F0260
FC 102/FC 202: 355–450
kW (475–600 hp)
FC 302: 315–400 kW
(425–550 hp) 176F0254 176F0256 176F0257 176F0259 176F0262
Table 3.10 Fuses, Enclosure Size E1 380–500 V
525–690 V Fuses Disconnect fuses RFI RFI fuses RFI disconnect
fuses
E1 FC 102/FC 202: 450–
500 kW (600–650 hp)
FC 302: 355–400 kW
(475–550 hp) 176F0253 176F0255 NA NA NA
FC 102/FC 202: 560–
630 kW (750–850 hp)
FC 302: 500–560 kW
(650–750 hp) 176F0254 176F0258 NA NA NA
Table 3.11 Fuses, Enclosure Size E1 525–690 V
NOTICE!
For further information, see the Instruction Installation of Field Installable Kits for VLT Drives .
Mechanical Installation
VLT
®
HVAC Drive FC 102
36 Danfoss A/S © 08/2014 All rights reserved. MG11F522
3 3