4 User Interface
4.1 Local Control Panel
The LCP is the combined display and keypad. The LCP can
be attached to the display connector outside the unit
(without opening the enclosure) via the LCP cable/plug.
The LCP is the user interface to the frequency converter.
The LCP has several user functions.
•
Start, stop, and control speed when in local
control
•
Display operational data, status, warnings, and
cautions
•
Programming frequency converter functions
•
Manually reset the frequency converter after a
fault when auto-reset is inactive
An optional numeric LCP is also available. The numeric LCP
operates in a manner similar to the LCP. See the
VLT
®
Decentral Drive FCD 302 Programming Guide
for details on
use of the numeric LCP.
4.1.1 LCP Layout
The LCP is divided into 4 functional groups (see
Auto
on
Reset
Hand
on
Off
Status
Quick
Menu
Main
Menu
Alarm
Log
Canc
el
In
fo
Status
1(1)
1234rpm
Back
OK
43,5Hz
Run OK
43,5Hz
On
Alarm
Warn.
130BC362.10
a
b
c
d
1.0 A
a
Display area.
b
Display menu keys for changing the display to show
status options, programming, or error message history.
c
Navigation keys for programming functions, moving the
display cursor, and speed control in local operation. The
status indicator lights are also in this group.
d
Operational mode keys and reset.
Illustration 4.1 LCP
4.1.2 Setting LCP Display Values
The display area is activated when the frequency converter
receives power from mains voltage, or an external 24 V
supply.
The information displayed on the LCP can be customized
for user application.
User Interface
VLT
®
Decentral Drive FCD 302
32
Danfoss A/S © 05/2016 All rights reserved.
MG04F402
4
4