circuit power S
sc
≥
the value specified above. If necessary,
consult the distribution network operator.
Other power sizes can be connected to the public supply
network by consultation with the distribution network
operator.
Compliance with various system level guidelines:
The harmonic current data in
to
are
listed in accordance with IEC/EN 61000-3-12 regarding the
power drive systems product standard. These data may be
used:
•
As the basis for calculation of the influence of
harmonic currents on the supply system.
•
For the documentation of compliance with
relevant regional guidelines: IEEE 519 -1992; G5/4.
System Integration
Design Guide
MG03M202
Danfoss A/S © 06/2016 All rights reserved.
31
3
3
