8-49 BTM Error Log
Range:
Function:
0.255
*
[0.000 -
9999.255]
List of parameters that failed during
bulk transfer mode. The value after the
decimal break is the fault code (255
stands for no error).
8-50 Coasting Select
Option:
Function:
Select control of the coasting function via the
terminals (digital input) and/or via the bus.
[0]
Digital
input
Activates start command via a digital input.
[1]
Bus
Activates start command via the serial
communication port or fieldbus option.
[2]
Logic AND Activates start command via the fieldbus/serial
communication port and 1 extra digital input.
[3]
*
Logic OR
Activates start command via the fieldbus/serial
communication port or via 1 of the digital
inputs.
8-51 Quick Stop Select
Select control of the quick stop function via the terminals (digital
input) and/or via the bus.
Option:
Function:
[0]
Digital input
[1]
Bus
[2]
Logic AND
[3]
*
Logic OR
8-52 DC Brake Select
Option:
Function:
Select control of the DC brake via the terminals
(digital input) and/or via the fieldbus.
NOTICE
When
parameter 1-10 Motor Construction
is
set to
[1] PM non-salient SPM
, only selection
[0] Digital input
is available.
[0] Digital
input
Activates a start command via a digital input.
[1] Bus
Activates a start command via the serial communi-
cation port or fieldbus option.
[2] Logic
AND
Activates a start command via the fieldbus/serial
communication port, and also via 1 of the digital
inputs.
[3] Logic OR Activates a start command via the fieldbus/serial
communication port, or via 1 of the digital inputs.
8-53 Start Select
Option:
Function:
Select control of the frequency converter start
function via the terminals (digital input) and/or
via the fieldbus.
[0]
Digital
input
Activates a start command via a digital input.
[1]
Bus
Activates a start command via the serial
communication port or fieldbus option.
[2]
Logic
AND
Activates a start command via the fieldbus/
serial communication port and also via 1 of the
digital inputs.
[3]
*
Logic OR
Activates a start command via the fieldbus/
serial communication port or via 1 of the digital
inputs.
8-54 Reversing Select
Option:
Function:
[0] Digital
input
Select control of the frequency converter reverse
function via the terminals (digital input) and/or
via the fieldbus.
[1] Bus
Activates the reverse command via the serial
communication port or fieldbus option.
[2] Logic AND Activates the reverse command via the fieldbus/
serial communication port and also via 1 of the
digital inputs.
[3] Logic OR
Activates the reverse command via the fieldbus/
serial communication port or via 1 of the digital
inputs.
8-55 Set-up Select
Option:
Function:
Select control of the frequency converter set-up
selection via the terminals (digital input) and/or
via the fieldbus.
[0]
Digital
input
Activates the set-up selection via a digital input.
[1]
Bus
Activates the set-up selection via the serial
communication port or fieldbus option.
[2]
Logic
AND
Activates the set-up selection via the fieldbus/
serial communication port and via 1 of the
digital inputs.
[3]
*
Logic OR
Activates the set-up selection via the fieldbus/
serial communication port or via 1 of the digital
inputs.
8-56 Preset Reference Select
Option:
Function:
Select control of the preset reference selection
via the terminals (digital input) and/or via the
fieldbus.
Parameters
Programming Guide
MG92F102
Danfoss A/S © 12/2015 All rights reserved.
31
6
6
