Danfoss VLT AutomationDrive FC 302, Instruction Manual

Page: 169 / 174

Frame size Bussmann PN Rating
D, E, F FNQ-R-3 3 A, 600 V
Table 11.20 Transformer Fuse (Line Contactor)
Frame size Bussmann PN Rating
D, E, F FNQ-R-1 1 A, 600 V
Table 11.21 Soft Charge Fuses
11.6 General Torque Tightening Values
For fastening hardware described in this manual, use the torque values in Table 11.22 . These values are not intended for
fastening IGBTs. See the instructions included with those replacement parts for correct values.
Shaft Size Driver Size Torx/Hex [mm] Torque [Nm] Torque [in-lbs]
M4 T-20/7 1.0 10
M5 T-25/8 2.3 20
M6 T-30/10 4.0 35
M8 T-40/13 9.6 85
M10 T-50/17 19.2 170
M12 18/19 19 170
Table 11.22 Torque Values
Specifications Instruction Manual
MG37A222 Danfoss A/S © Rev. 2014-02-07 All rights reserved. 167
11 11