Parameter 16-86 FC Port REF 1
Table 644: Parameter 16-86 FC Port REF 1
16-86 FC Port REF 1
Default Value: 0
Parameter Type: Range, -200 - 200
Setup: All set-ups
Conversion Index: 0
Data Type: N2
Change during operation: False
View the 2-byte status word (STW) sent to the fieldbus master. Interpretation of the status word depends on the fieldbus option
installed and the control word profile selected in
parameter 8-10 Control Word Profile
.
Parameter 16-87 Bus Readout Alarm/Warning
Table 645: Parameter 16-87 Bus Readout Alarm/Warning
16-87 Bus Readout Alarm/Warning
Default Value: 0
Parameter Type: Range, 0 - 65535
Setup: All set-ups
Conversion Index: 0
Data Type: Uint16
Change during operation: False
Alarm and warning numbers in hex as shown in the alarm log. The high byte contains the alarm, the low byte contains the warning.
The alarm number is the 1
st
that occurred after the last reset.
Parameter 16-89 Configurable Alarm/Warning Word
Table 646: Parameter 16-89 Configurable Alarm/Warning Word
16-89 Configurable Alarm/Warning Word
Default Value: 0
Parameter Type: Range, 0 - 65535
Setup: All set-ups
Conversion Index: 0
Data Type: Uint16
Change during operation: False
This alarm/warning word is configured in parameter
8-17 Configurable Alarm and Warningword
to match the actual requirements.
4.16.7 16-9* Diagnosis Readouts
Parameter 16-90 Alarm Word
Table 647: Parameter 16-90 Alarm Word
16-90 Alarm Word
Default Value: 0
Parameter Type: Range, 0 - 4294967295
Setup: All set-ups
Conversion Index: 0
Data Type: Uint32
Change during operation: False
Show the alarm word sent via the serial communication port in hex code.
Parameter 16-91 Alarm Word 2
Table 648: Parameter 16-91 Alarm Word 2
16-91 Alarm Word 2
Default Value: 0
Parameter Type: Range, 0 - 4294967295
Setup: All set-ups
Conversion Index: 0
Data Type: Uint32
Change during operation: False
Show the alarm word sent via the serial communication port in hex code.
AU373327181955en-000101 / 130R1208 | 315
Danfoss A/S © 2021.08
Parameter Descriptions
VLT® AutomationDrive EZ FC 321
Programming Guide