4.2.2 Receiving the Active Filter
When receiving the unit, please make sure that the
packaging is intact, and be aware of any damage that
might have occurred to the unit during transport. If
damage has occurred, immediately contact the shipping
company to make a damage claim.
NOTE!
Damaged packaging can indicate inappropriate transport
which might have resulted in internal unit damage. Even
though the unit seems to be intact externally, make sure
to survey the damage.
4.2.3 Transportation and Unpacking
Before unpacking the active filter it is recommended that it
is located as close as possible to the final installation site.
Keep the filter on the pallet and boxed, as long as possible
to avoid scratches and dents.
How to Install
VLT Active Filter AAF 00x
4-2
MG.90.V2.22 - VLT
®
is a registered Danfoss trademark
4
4
