Danfoss Vacon NXP Series, Operating Manual, Page: 15 / 174

3 Product Overview
3.1 Intended Use
The drive is an electronic motor controller intended for:
•
Regulation of motor speed in response to system feedback or to remote commands from external controllers. A power drive
system consists of the AC drive, the motor, and equipment driven by the motor.
• System and motor status surveillance.
The drive can also be used for motor overload protection.
Depending on the configuration, the drive can be used in standalone applications or form part of a larger appliance or installation.
The drive is allowed for use in residential, industrial, and commercial environments in accordance with local laws and standards.
NOTICE
In a residential environment, this product can cause radio interference, in which case supplementary mitigation measures can
be required.
Foreseeable misuse
Do not use the drive in applications which are non-compliant with specified operating conditions and environments. Ensure
compliance with the conditions specified in
12.8 VACON NXP Technical Data .
3.2 Manual Version
This manual is regularly reviewed and updated. All suggestions for improvement are welcome.
Table 1: Manual and Software Version
Edition Remarks
DPD00910G Package label and type code information changed in 3.3 Package Label and 3.4 Description of the Type Code .
Information on removing the jumper X10-1 added in 6.6.1 Installing the AC drive in an IT System, FR4-FR6 .
Information on creating a service info file added in 11.3 Creating Service Info File .
Structure of the manual changed.
3.3 Package Label
The package label gives detailed information about the delivery.
Product Overview Operating guide | VACON® NXS/NXP Air-cooled
DPD00910G | 15
Danfoss A/S © 2018.06