![background image](http://html.mh-extra.com/html/danfoss/tp5001-series/tp5001-series_user-instructions_508801006.webp)
6
d) Press
PROG
to move to the next preset time
and temperature (Event 2).
e) Repeat steps b, c, & d to programme the
remaining weekday events.
For Days 6-7 (weekends)
Press
PROG
until the fi
rst preset time and
temperature (Event 1 Days 6-7) appears in display.
Repeat steps b, c, & d above to programme the
remaining weekend events.
Changing the preset programmes in 24 hour mode
a) Press
PROG
until the fi rst preset time and
temperature (Event 1 for all days of the week)
appears in display.
b) Use
the
+
and
-
buttons to adjust the
TIME
(press and hold to change in 10 min increments).
c) Use
the
Λ
and
V
buttons to adjust the required
TEMPERATURE
.
d) Press
PROG
to move to the next preset time
and temperature (Event 2).
e)
Repeat steps b, c, & d to programme the remaining events.
Changing preset programmes for AB programming
(Installer setting must be in 5/2 day mode)
Press and hold
PROG
and
V
for 3 seconds. The
display will change to the fi gure opposite. This
will take you into
User Advanced Programming
option 1.
Use
Λ
and
V
keys to enable or disable the function
(1=enabled, 0=disabled).
Press
PROG
for 5 seconds until the display changes
and the colon in the display fl ashes to confi rm that
you are in
RUN
.
Press
PROG
once, the display will change to show
the default days assigned to programme “A” (days
1, 2, 3, 4 & 5).
U
ser Instruc
tions
GB
Summary of Contents for TP5001 series
Page 103: ...103 ...