Setting On and Off times:
Instruction
Buttons Used
Screen Display
To set the 1
st
period of the day ( ) Press the button for
5
seconds
. Display changes to show
Mon, Tue, Wed, Thu, Fri
with the
HOUR
flashing. Use
<
or
>
to set the
HOUR
of your
first temperature event
. Press to make the
MINUTES
flash.
Use
<
or
>
to set the MINUTES.
< >
Press and the display will change to show
TEMPERATURE
flashing. This is the
TEMPERATURE
you want the room at for
the first period of the day. Use
<
or
>
to adjust the
TEMPERATURE
e.g.
21
o
C
. Press to set and move to period
two ( ).
< >
The display now shows period two ( ) with the HOUR
flashing. Use
<
or
>
to select the time you wish period ( ) to
start. Press to set the
MINUTES
using
<
or
>
buttons. Press
to confirm and then use < or > to set the required
TEMPERATURE e.g. 16
o
C. Press and repeat the previous
steps to set the period 3 ( )and 4 ( )
< >
Once periods and have been set, the display will change
to show SAT SUN. Repeat previous processes to set the time
and temperature events for the weekend.
< >
Once the temperature has been set for period using
button, the display will revert to its
normal operating display
NOTE
: If your unit is set for 24hr programming, the display will show Mon Tue Wed Thu Fri Sat Sun during
programming and all days will have the same times and temperatures set. This is changed in the advanced setting,
see the full user guide for further instruction.
Away Mode:
Away mode is used to temporarily stop the timing functions if
you are away for a period of time.
To
enable
AWAY
mode, press
M
button and a will appear
in the display.
The AWAY mode temperature is set to 16
o
C by default. To
change, consult full user instructions.
M
To
disable
AWAY
mode, press and release
M
button – normal
programme times are resumed.
M
